All of our ceiling panels measure 2' x 2' or 2' x 4' and cover 4 sq. ft. and 8 sq. ft. respectively.

We offer 6", 12" and 24" patterns within the 2' x 2' or 2' x 4' format. 6" pattern tiles repeat 16 times per panel, 12" patterns repeat 4 times per tin panel. 24" patterns do not repeat.

We offer the following different types of vinyl ceiling panels.

• Drop-In: Used in standard 2'x2' or 2'x4' suspended ceiling grid systems with 15/16" or 9/16" wide rails.
• Drop-In Acoustic: Used in standard 2'x2' suspended ceiling grid systems with either a NRC .85 or a NRC .50 rating. Includes the Soniguard™ Drop Ceiling Insulation for its acoustical properties.
• Refacing: Used in standard 2'x2' or 2'x4' suspended ceiling grid systems as lay-under panels where you want to leave your existing mineral fiber tiles in place.
• Glue-up: Uses adhesive to glue the panels directly to the ceiling or wall. For Glue-up (Overlapping Joint), the panels overlap for a seamless installation and can be used on walls and ceilings. For Glue-up (Butt Joint), the panels butt next to each other and require either Decorative or Smooth Strips to cover the seams. This type of Glue-up panel is recommended for ceiling only.

Our vinyl ceiling tiles come in two thicknesses, either a lightweight 0.013 or a thicker 0.03 inch vinyl plastic. They are Class A fire rated and are 100% recyclable. They are waterproof, washable, Greenguard Gold certified for indoor air quality, and made in the USA.

All of our vinyl panels are Class A rated for surface burn characteristics and falls within ASTM E84-14 standards. Learn more

Prices differ based on size, collection, and finish. You can find pricing listed on every product page.

Vinyl is resistant to staining, spotting, swelling, peeling, rotting, and rusting. It uses 75% less raw material to manufacture than mineral fiber board ceiling tiles, and is five times more efficient to ship. It is easy and flexible to install.

Most ceiling tiles do have an impact on acoustics. For instance, most suspended ceilings have an NRC rating of 0.05-0.55. Our thermoformed tiles come in at NRC 0.25-0.45. When you combine our perforated acoustic tiles with Soniguard acoustic insulation, the NRC rating is as high as 0.85.

Vinyl is 100% waterproof and can be installed in wet environments. They do not absorb moisture, stain, mold, or mildew.

Warm water and a soft cloth is all that's needed to clean your vinyl tiles. You can use a mild detergent if needed. Simply wipe, rinse, and dry.

You can read about all our policies in the Resource section of our website.

You can paint vinyl tiles. Keep in mind that doing so will void all fire ratings and certifications, and will void the warranty. Do not use harsh chemicals such as paint thinners or cleaners directly on the vinyl.

Different types of vinyl panels have different installation methods.

• Drop-In tiles are simply placed in a grid suspended from the ceiling.
• Refacing tiles are laid under existing mineral board ceiling tiles.
• Glue-Up tiles are installed by placing adhesive around the perimeter and center of the tile then pressing into the surface with medium-firm pressure.

Visit the Resources section on Installation for more information.

Kitchen backsplashes receive a lot of abrasive cleaning that can damage the finish on vinyl tiles. Due to this, we do not recommend our tiles for backsplashes.

Yes. Vinyl is 100% waterproof and is the ideal material for a bathroom or the basement. Please note that our vinyl tiles will not constitute a moisture barrier, so areas that require one will need one applied before the vinyl tiles are installed.

Installing partial tiles along the border areas of the ceiling is simple. Just mark, cut with snips or scissors, then install as usual. Be sure to select appropriate tiles for the borders. Cutting off an ornate pattern can end up looking less than handsome so consider a pattern that has a smaller repeating pattern to complete your borders. Learn more

Different types of lighting fixtures can be installed on our drop-in ceiling panels. Learn more here

Vinyl panels are susceptible to color bleaching when in direct sunlight. We do not recommend that vinyl tiles be installed in areas (indoors or out) where ceiling temperatures will reach above 120 degrees F.

Cast & Bevel vinyl ceiling tiles are made to order and are not stocked product. The manufacturing lead time is five (5) business days or less. Order production starts when payment is received and orders ship as soon as they are completed. Orders ship from our California manufacturing facility. Here is the approximate time to ship orders from California:

• 1 business day to central California and western Nevada
• 2 business days to locations west of the Rocky Mountains
• 3 business days to the east slope of the Rockies
• 4 business days to the great Midwest
• 5 business days to the East Coast

Free ground shipping applies to the continental U.S. and excludes Alaska, Hawaii, Puerto Rico.

Yes, full sized (24"x24") samples in the Modern Grid pattern in all colors are available to purchase at a discount for sampling purposes. We limit the number of discounted sample tiles to four (4). If you want to sample a pattern that is not the Modern Grid pattern, then please call us to place your order.

Follow up orders over $500 can be credited for one (1) Sample Pack (up to 4 sample panels), otherwise Sample Packs are not returnable. We recommend recycling them or passing them on to another interested party.

All products are made to order and are not stocked product. Therefore, orders are not returnable. Prior to ordering, we highly recommend placing a sample order which is a full sized (2'x2') panel. If you want a tile pattern that is not offered under the sample program, then please call to place the sample order.

Cast & Bevel vinyl tiles are guaranteed to be free form defects for 5 years after the date of purchase.

Our Warranty Does Not Cover:

• Damage caused by improper maintenance or use.
• Normal wear and tear
• Color changes due to exposure to fumes, smoke, or mistreatment, etc.
• Color differences between samples or website photography and product purchased.
• Labor charges related to the purchase and installation of the product.
• Painting the vinyl will void the warranty.